KD-TSQ1 Fully Automatic Enclosed Tissue Processor
■ Operator Interface of 15 inch color LCD touch screen
■ Enclosed Tissue treatment system with no pollution of gas leakage, to meet requirement of environmental protection.
■ Mode of Sample processing: Sample not move,Reagent move.
■ it can avoid the risk of power failure of machine, or other mechanical failure.
■ Timing Mode: Finishing time of tissue processing any day in the week can be set
■ Fuction of Protection System of Power Failure.Once main power restored, the previous protocols is automatically resumed and continue to work in order.
■ 10 Set of Programmes stored in the system and can be set for purpose.
■ Special design of Reagent Station makes the liquid totally back-flow to avoid any mixture and to extend using time of reagent.
■ Patented design of cassette holder makes reagent and samples thoroughly contact with each other,it improves effection of tissue processing and reduce working time.
■ Dual Purpose of processing: one key switch normal processing motion and Rapid processing motion
■ Rapid Processing motion stirred in day time finished in 3 hours,Normal Processing Motion stirred in the evening.
■ Device for Air pressure transfer: Formal air pressure transfer of several solenoid valves replaced by One single mechanical structure replace formal in order to avoid high fault error.
■ Fuction for changing wax automatically:
■ Wax in No.1 Container wash into waste container,then,wax in NO.2 container goes into No.1 Container,then,No.3 goes into No.2,and so on
■ Fuction of over temperature protection occured by accidental heating
■ Fuction for magnetic stirring which shorten time of tissue processing and make good processing effection.
■ Alarm and Screen display when finishing work.
■ Capacity of tissue processing: 300pcs cassette at most.
■ Bottle amount : 12. 1 - 9 for dehydration reagent, 14 - 16 for cleaning agent
■ Nos of Reagent Station: 12
■ Tissue Processing Station: NO.1 to No.9 Station
■ Washing Station: No.14 to No.16 Station
■ Nos of Wax Tank: 3(No.10,12 and 13)
■ Nos of Working Station: 1
■ Capacity of Processing Station: 9Liters
■ Capacity of Reagent Station :6L
■ Temp.of Processing Station:
■ Medium is the solvent: ≤45℃
■ Medium is the Wax: 58℃-70℃
■ Operation pressure:<0.1Mpa
■ Wax temperature :58℃-70℃
■ Wax melt time not more than 3 hours
■ Power input:<1500VA+10%
■ Time for immerse: 0 - 99 hours 59 minutes
■ Working Voltage:220VAC±10%,50/60HZ
■ Time for Inflow Liquid: no more than 5Min
■ Time for Exclude Liquid: no more than 5Min
■ Stirring time: set randomly
■ Interval time for Stirring: set randomly
■ Operation mode: manual and automatic
■ Paraffin temperature - adjustable in the range of 55°C-80°C
■ Temperature of reagents up to 0°C-45°C